MANDOLIN BRIDGE These are high quality, ebony mandolin bridges that remain true to Loar Era Specifications. These include accurate string compensation and small thumbwheels with proper knurl and edge radius. These are a perfect choice for newly made mandolins as well as replacement bridges on vintage mandolins. They generally come without string slots, however, these can be specially ordered with slots, along with other options listed below. (The bridge in the picture above has an optional Patent Stamp, and Radiused Saddle. If you wish to order these or any other options, just order the "Standard Bridge, then order any options you would like to add, at the "Options $5.00 each" Button below.) As with all bridges, final fitting to the mandolin top is required. Standard Bridge: $55.00  (Specify thumbwheel color below) (International orders will need to pay additional shipping.) Saddle Options 9 5/8" Radius $5.00 12" Radius $5.00 Lefty $5.00 String Slotting $5.00 Tall Boy $5.00 Low Boy $5.00 Base options Full Contact $5.00 Patent Stamp $5.00 Mandolin bridge Bridge with Nickel Th. $55.00 bridge with Gold Th. $55.00 Enhance the tone and appearance of your mandolin with one of these precision built solid ebony bridges! DUAL ACTION TRUSS ROD These truss rods are constructed with two cold finish steel rods and two brass blocks. Each rod is covered with heat shrink to minimize buzzing and rattling, and to allow for easier adjustment. The  Truss Rod shown in the picture has a block-to-block measurement of 7 1/4" with 1 1/8" out past the block, and a 1/8" Allen Wrench End. Custom lengths and ends are available upon request. (Please email or call.) Price: $19.50 for Mandolin, Mandola, Guitar and Bass GuitarTruss Rods.       Choose End Option 1/4" Hex Nut End 1/8" Allen Wrench End	JAMES MANDOLIN TAILPIECE Price: $140.00 Available in either Gold or Silver Plating. Choose below. Choose Plating Gold Silver Bill James Mandolin Tailpiece This one is silver plated, and is shown in the closed position.
Block to Block Measurement Mandolin 7.25" Mandola 8.5" Guitar 14" Guitar 14.5" Guitar 17" Block to Block Measurement Bass Guitar 22" Bass Guitar 24" The drawing below shows what "block to block" measurement means.  It is the measurement from the outside of one block to the outside of the other block.	JAMES MANDOLIN TAILPIECE                     Here we have what could quite possibly be the best mandolin-oriented invention to come along since the early 1920's! This cleverly designed and well built mandolin tailpiece combines a traditional look and feel with modern manufacturing techniques and modern conveniences! Many thanks to Bill James for creating this fantastic tailpiece! There are several innovations that make this James tailpiece something special. The cover is hinged and never leaves the instrument. No more lost or misplaced covers! A slight pressure is all that's required to open or securely close the cover. In addition, when the cover is closed, the strings and cover are fully dampened from undesirable vibration. String changing is easier with this tailpiece too, as the cover can be closed each time you add a string, keeping it from jumping off of its mounting tab, as often happens with other tailpieces. If you have changed very many mandolin strings, you will know that this feature in itself is a welcome one. A handsome and traditional "stitch" pattern is engraved on the satin-finished cover. All necessary mounting hardware, along with easy to follow instructions are included with this classy tailpiece. This tailpiece is an excellent choice for new builds, and also a great way to go if you need to change your old, loose, rattling stamped metal tailpiece. For ease of mounting, the screw and end pin hole pattern has been designed to work on most mandolins.